Led Panel Light


What is Led Panel?

Led Panel is the lighting agents formed by optionally covering the top of the LED chips placed on the aluminum sheet with a plexi layer.
Led panels to come into many shapes as shapes. It is a product that is preferred by everyone because it can be used almost everywhere. Led panels are divided into 2 different groups. These; Surface Mounted Led Panels and Plaster Panels.
 Because LED Panels are inherent LEDs, it is of great importance as energy saving. Therefore, low watts and multiple pieces are used. It also creates a different atmosphere with different color options.

Led Panel Light

Why Led Panel?

In previous periods, fluorescent luminaire materials were often of great importance on the job site. Because the technology at that time was not as advanced as the technology of the present-day, and at that time people thought that fluorescent materials were consuming less energy than other lighting materials. However, after the widespread use of the LED, fluorescent lighting materials have become increasingly used.

Energy when you buy a Led Panel:

4x18w Led Fluorescent Luminaire - 4 pcs 18w Led Fluorescent the bulb is used.
Total energy consumed: 72 Watt
36w Led Panel Fixture - 1 pcs 60 × 60 Led Panel.
Total energy consumed: 36 Watt
36w Led Panel Armature consumes 50% less energy. It also provides more lighting as lighting. It also has a thinner and more elegant appearance. Therefore, people play an active role in the use of Led Panel fixtures.

Where can we use Led Panel?

Led panels generally change formally according to the area of ​​use. E.g.; if the Led Panel material will be used at home, then it can mostly be used as LED Panel SLIM ROUND or Led Panel SQUARE. It can also be used in various working areas such as the workplace, office, markets, etc. Also available are Led Panel FIXTURES.

Comments

Post a Comment

Popular posts from this blog

Led Lighting Technology

Image
Operating Temperature  This is the temperature of the environment in which the luminaire will be operated. All device life measurements issued by LED manufacturers are performed at different ambient temperature ranges. High ambient temperatures for a particular luminance will shorten the operating life of the device, and low temperatures will ensure that the LED will last longer than expected. Standard International is a measure of the intensity of lighting. One candela is a lumen / steroidal. It was previously referred to as edil candle Daha. The illumination intensity of a light source in a given direction is expressed in candela (cd). Depending on the respective direction, any light source will have many different illumination intensities. Since the intensity of illumination itself is a characteristic of the light source, the candela value in a certain direction remains the same regardless of the distance to the source. LAMP KANDELA AT 0 ° ...
Read more

Led Ceiling Fixture

Image
What is Led Ceiling Fixture? For years, human beings have used light to illuminate the places they have been and this has caused a variety of lighting materials. After entering the LED materials in our lives, most of the lighting materials have undergone many changes depending on the LED. Luminaires vary among themselves. types of luminaires, such as fluorescent type luminaires, round type ceiling luminaires and so on. However, the luminaires changed after Led.    Such as 60 × 60 Led panel luminaire, Led Ceiling Fixtures. There are also two kinds of luminaires in Led Ceiling Luminaires.    These; Led Led Ceiling Fixture and Led Ceiling Fixture (Led Bulb) is. Ceiling Luminaires are one of the most widely used Led electrical materials with its sensor types. Because of Sensor Led Ceiling Luminaires both energy saving an image with this Sensor Led Ceiling Fixture draws itself. Led Ceiling Luminaires with Sensors are very important in terms of ...
Read more

LED Technology

Image
LED Technology The LEDs emit light in a certain part of the visible light spectrum depending on the material structure of the active layer. In other words, a single color light is produced and the material used in the active layer determines the color of the LED light. In high-light colored LEDs, different materials are used as active layers (GaAs, Gap, GaN, AlInGaP and InGaN). Producing white light with LEDs is possible in two ways. The first of these; red, green and blue is to obtain white light using three LED chips in a case. The second method is to produce white light by stimulating a phosphorus layer of light produced in the blue LED chip. They are covered in a variety of structures, mainly radial shape. They are produced with PIN pedestals for normal printing circuits, SMT (surface mounting technology) and directly on printed circuit boards. Benefits of Led Technology They provide high-efficiency lighting. It can save up to 80% by 40% compared to existing l...
Read more